Installing a Brick Paver Walkway or Hanger Bricks

Using Setting up a Brick Paver Walkway or Decorative Bricks or Pavers to create a sidewalk or patio complements a house in a way that is unequaled. It includes a level of quality and sophistication to a house entrance that can not be achieved with either concrete or asphalt. Brick and Pavers likewise come in various colors and shapes permitting unique color pattern and patterns to be achieved. In addition, installing a Brick or Paver walkway does not always require a pro. With some fundamental understanding and a fairly easy walkway strategy, a house owner is capable of carrying out such a job.

The secret to installing a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. In addition, string lines should be strung on each side of the walkway.
As soon as the location has been dug, 3/4" gravel stone must be laid in and tamped down tightly. Then 2" of sand, or stone dust need to be spread over the gravel. Once again the sand/stone dust must be tamped down. Stone dust is chosen. The height in between the tamped down sand and the stringline must equal the density of the brick or paver.

Now that you have a stable base, put a 1" pipe or journal board the length of the sidewalk on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your pathway border click here and aid to preserve the integrity and shape of the sidewalk.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the integrity of the walkway.

Inevitably bricks/pavers will require to be cut or divided when building the pathway. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with additional sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the brand-new pathway and sweep into the fractures. Repeat this more info procedure a number of times to make sure the fractures are totally filled. This will complete the interlocking of the bricks and help to eliminate any weed development. Just include grass seed to the outside edges and you must have a beautiful entryway to your home within a couple of weeks.


In addition, installing a Brick or Paver pathway does not always need a pro. The secret to setting up a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, put a 1" pipe or journal board the length of the pathway on either side of the walkway. These strips will act as your walkway border and aid to preserve the stability and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or divided when constructing the sidewalk.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Installing a Brick Paver Walkway or Hanger Bricks”

Leave a Reply

Gravatar